STAMMOPUR AG

Description

STAMMOPUR AG
Plaster and Alginate Remover

Ready-to-use solution for plaster and alginate removal for medical instruments, accessories, tools and components of medical devices used for impression taking and modelling in the dental field. For use in ultrasonic bath and immersion bath processes.

The preparation is used in the process of instrument and accessory cleaning in the dental practice and in the area of component, instrument and tool cleaning in the dental laboratory.

At a glance
- Ready for use
- Removes plasters and alginates
- Very high material compatibility, conditionally for light metals
- Biodegradable
- High cleaning effect in the ultrasonic bath

Material compatibility and impurities
STAMMOPUR AG has a very high material compatibility.
Due to the formulation in the mild-alkaline range, the preparation itself is conditionally suitable for light metals.
Light metals and their alloys must be tested for resistance before use.

Removes
- Gypsums
and alginates

From the following materials
- Metal,
- light metals to a certain extent,
- Titanium,
- Glass,
- Porcelain,
- Ceramics,
and plastic.

Application
The exclusively professional users are trained specialists.

STAMMOPUR AG has a high cleaning effect on specific impurities such as gypsum and alginates.

Dental plasters are dissolved with the formation of bubbles. If the bubble formation decreases, the solution must be exchanged.

Alginates are dissolved by STAMMOPUR AG and can be easily lifted off the instrument, e.g. impression tray, after the exposure time or rinsed down with a strong water jet.

The application is carried out either in an ultrasonic bath or in an immersion bath.

Dosage and contact time
Dosage:
in ultrasonic bath: undiluted
without ultrasound: undiluted

Exposure time:
in ultrasonic bath: 3-10 min
without ultrasound: 15-120 min

Temperature: 20 - 60°C

Composition per 100g:
> 10 % Complexing agent (EDTA),
1-< 10 % Zitronensäure, 1-< 10 % Karbonate, 0,1-< 1,0 % amphotere Tenside Produkt-pH-Bereich: mild alkalisch Die Anwendung erfolgt ohne weitere Verdünnung. Eine Beimischung von Zusätzen in die Reinigungslösung ist nicht zulässig. Besondere Hinweise Adhäsive (Haftvermittler bzw. Klebestoffe) werden nicht entfernt. Optiken, Lichtleiter und geklebte Teile nicht mit Ultraschall behandeln. Gefahrenhinweise H318 Verursacht schwere Augenschäden. Sicherheitshinweise P305+P351+P338 BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser ausspülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter ausspülen.