SONOSHAKE® – Ultrasonic bath SONOREX DIGITEC DT 1028 F combined with shaking device SA 1028

registered pattern DE 20 2009 017 749.1

SONOSHAKE offers a wide range of applications for sample preparation in many areas of analysis, as in environmental and foodstuffs analytics as well as in medical diagnostics. The bath has a basic area of 500 mm x 300 mm and a tank depth of only 65 mm, making it ideal for sonication of samples in laboratory flasks. The samples can be sonicated either for a selected time or in continuous mode. Quick degassing using the DEGAS function is also possible. Four different shaking frequencies enable a gentle to vigorous reciprocating motion up to a maximum of 20 mm. Both procedures can be carried out simultaneously or separately. This means that, for example, a sample can be pre-homogenized at a specified shaking frequency, and then final homogenization can be achieved in a very short time using ultrasound.

SONOSHAKE®
Consisting of:

  • ultrasonic bath DT 1028 F
  • shaking device SA 1028

Code No. 3257

Shaking device SA 1028

  • analogue setting of time (1–15 min or continuous) and shaking frequency
  • reciprocating motion: settings in 4 steps possible of up to 200 rpm
  • constant amplitude of 20 mm independently of loading
  • roll rack easy to remove
  • fast mounting of the laboratory clamps EK 10–250 (to be ordered separately)
  • shaking platform approx. 410 × 280 mm (l × w)
  • mounting of 36 ×10-ml-flasks or 36 × 25-ml-flasks or 18 × 50-ml-flasks or 12 × 100-ml-flasks or 10 × 250-ml-flasks
  • required floor space for SONOSHAKE approx. 850 × 360 mm (l × w)

The shaking device SA 1028 can also be added to existing SONOREX DIGITEC DT 1028 F ultrasonic bath.

Shaking device SA 1028