Homepage » Products » Medicine » Cleaning systems Robotic instruments

Cleaning systems for robotic instruments - safe, efficient, standard-compliant

Robotic instruments present reprocessors with challenges that are unknown to conventional surgical instruments. The complex design with long hollow bodies, internal wire pulls and multi-axis tips prevents any safe manual visibility and accessibility. Hospitals need procedures that are reproducible, validatable and reliably documented.

BANDELIN developed TRISON after early users of robot-assisted systems reported specific deficits in pre-cleaning and were unable to achieve reliable process quality with existing methods. Increasing operating theatre cycles and the growing volume of instruments are exacerbating these requirements.

Why special cleaning systems are necessary for robotic instruments

Robotic instruments usually consist of a housing, a long shaft, filigree working ends and complex internal structures that are moved by wire hoists. The interior remains completely concealed and cannot be dismantled or inspected. Contamination is deposited deep in the cavities and is almost impossible to remove manually. Every reprocessing chain begins with thorough pre-cleaning; without this preliminary work, disinfection and sterilisation cannot achieve a reliable effect. „Sterile dirt“ does not exist. Time pressure, limited personnel resources and a lack of visual inspection increase the risk of incomplete cleaning. The early generation of robotic instruments made this problem particularly clear: clinics found recurring residues inside, even though manual pre-cleaning was carried out very conscientiously.

In addition, the narrow interior spaces and mechanical guides make cleaning more difficult because organic residues get stuck in narrow gaps, angles and channels. Without a directed flow of liquid, zones are created inside in which rinsing solutions are barely effective. The length of the shaft means that deposits are retained in areas that cannot be reached manually. Brushes and nozzles lose their effectiveness in such deep zones, as neither pressure nor mechanical force can be transmitted effectively. The instrument-specific complexity thus creates a technical situation in which only a controlled, energy-introducing process can reliably reach the interior and clearly document the process.

Differences and requirements: Robotic instruments vs. classic surgical instruments

Conventional surgical instruments have an open design, can often be dismantled and are fully accessible in a few simple steps. The cleaning option is visible, can be documented and is easy to control for routine processes. Robotic instruments, on the other hand, combine several joint levels, precision mechanical tips and long hollow bodies in a design that cannot be dismantled. Contamination sticks in areas that cannot be reached manually. Brushes or rinses can hardly reach angled internal zones and there is no reliable visual inspection. This increases the requirements for reproducibility, process control and documentable proof that all relevant areas have been reached. Robotic surgery therefore requires solutions that go beyond conventional cleaning methods and offer technical solutions that work with pinpoint accuracy and develop the same intensity in every cycle.

Main technologies and processes in cleaning systems for robotic instruments

TRISON combines three central principles into a standardised process: ultrasound, rinsing and agitation. The ultrasound dissolves even firmly adhering organic and dried-on residues quickly and gently. The rinsing reliably transports the dissolved particles out of the long shafts and prevents recontamination in the cavity. The movement of the tips ensures that ultrasonic energy and rinsing currents reach all internal mechanical surfaces. The fine joint sections are opened and moved in several axes so that no shielded zones are formed.

The system monitors each individual channel in parallel. Up to four robotic instruments are rinsed in one cycle, and at the end there is objective proof of rinsability. Time and temperature limits are monitored and all parameters are digitally logged. Each cleaning cycle generates its own process log for quality management.

The TRISON technology

Targeted ultrasound application

Reaches internal areas, removes even stubborn residues and produces a uniform cleaning effect without mechanical stress on precision mechanical structures.

Controlled indoor and outdoor flushing

Creates a continuous liquid flow through the entire shaft and safely removes loosened residues from deep, manually inaccessible segments.

Mechanical movement control of the working ends

Opens and moves joint sections in several axes so that no shielded zones are created and energy and flushing flows reach every relevant area.

Single channel monitoring

Checks the flushability of each instrument separately and thus creates a functional verification that can be objectively analysed.

Reproducible process parameters

Monitors time, temperature limits and flow rate so that every batch runs under identical conditions and is fully documented.

Validation, standards and quality assurance in the reprocessing of robotic instruments

Reprocessing is based on the recommendations of the KRINKO at the Robert Koch Institute for the cleaning, disinfection and sterilisation of medical devices. There is no specific standard for ultrasonic devices, but ultrasonic cleaning is firmly anchored in these recommendations. TRISON can be integrated into validation processes thanks to its reproducible parameter management. The systems monitor the relevant process variables and document them for QA inspections, audits and risk assessments. As each batch generates a digital log, the process remains fully traceable for hygiene and quality management. The evaluation of flushability creates additional safety because it functionally confirms that critical interior spaces have actually been reached.

Practical tips for AEMP/CSSD and hospital operations

Robotic operating theatres generate a high volume of instruments every day. In hospitals with several robotic procedures per day, 25 or more instruments quickly accumulate that need to be pre-cleaned promptly. The manual pre-cleaning of a single robotic instrument requires between 10 and 15 minutes of concentrated manual labour. At full capacity, this is almost equivalent to a full-time job. At the same time, manual quality is subject to fluctuations: Daily form, work pressure and incorrect workloads have a direct impact on cleaning quality. TRISON relieves the strain on staff, reduces the dangers of handling contaminated tips and lowers the risk of injury.

For integration into existing AEMP processes, clinics require a suitable installation area, including access and drains, as well as trained staff who can interpret the process protocols. In busy hospitals, automated pre-cleaning stabilises the entire reprocessing flow and has a positive effect on the operating cycle because instrument-related delays are eliminated. The documented process parameters facilitate internal QA checks and provide the teams with clear guidance as to when an instrument is actually ready for pre-cleaning. With regular use of robotics, such a system acts as a connecting element between the operating theatre and AEMP because it shortens the time between surgery and further processing and reduces external variables that would otherwise block the process.

Case studies and provider overview - use of modern systems in practice

We developed TRISON because the first users of robot-assisted surgery specifically asked for solutions for pre-cleaning from around 2010. BANDELIN had many years of experience with ultrasound technology in the hospital environment and developed the first generation of the system together with hospitals. The first update followed in 2014 with TRISON 3000, followed by TRISON 4000 in 2017 and TRISON 4000.2 around two years ago with an optimised operating concept and improved service friendliness.

Today, there are more than 150 TRISON devices from BANDELIN in Germany and all 35 university hospitals use at least one TRISON system. More than half of all robotics users utilise TRISON for pre-cleaning. The TRISON systems are compatible with the Da Vinci SI, XI, SP and Da Vinci 5 models and therefore cover the majority of robotic instruments used in everyday clinical practice. Other supported robotic systems will follow in the near future.

Everyday clinical practice shows why BANDELIN technology has established itself. Robotic interventions create tight surgical cycles in which any delay affects the entire procedure. Clinics report that the controlled pre-cleaning makes the handover between the operating theatre and AEMP more reliable and instrument-related bottlenecks occur much less frequently. The result is a stable process that relieves the burden on both surgeons and reprocessing teams, as a fixed technical point cushions the complex instrument logistics. Additional modules for MIS and standard instruments extend the range of functions, but remain supporting options. The main benefit lies in the safe and reproducible reprocessing of robotic instruments.

Costs, benefits and ROI: economic efficiency of modern treatment systems

A typical robotics day with around 25 instruments generates an immense amount of manual labour. At 10-15 minutes per instrument, pre-cleaning alone would take up almost a full-time position. TRISON cleans four instruments simultaneously in a validatable 15-minute process. Automation reduces errors, lowers staff workload and stabilises the overall workflow. The documented process management increases compliance security. Clinics benefit from predictable processes, plannable operating theatre cycles and less rework. These factors generate the economic benefits resulting from time savings, standardisation and risk reduction.

Conclusion

Robotic instruments require preparation processes that go beyond established methods. The combination of concealed internal structures, long shafts and delicate joint sections creates a technical complexity that can only be safely controlled by automated, verifiable processes. TRISON addresses these requirements by consistently managing process parameters, functionally checking interiors and documenting the relevant steps. This creates a process quality that can be measured and audited in AEMP structures. Hospitals with high operating theatre volumes benefit from the predictable timing, the reduction in staff workload and the stable cleaning performance. Digital logging creates traceable security for hygiene, QM and compliance requirements. Through close cooperation with robotic user clinics and continuous technical development, TRISON forms an infrastructure that grows with the increasing use of robotic surgery and lays the foundation for reliable instrument-related process chains.

FAQ

Robotic instruments have long hollow bodies, internal wire pulls and multi-axis tips. These areas are almost impossible to reach manually. Systems such as TRISON combine ultrasound, rinsing and movement, monitor the channels and document the process. Standard instruments do not require this intensity and monitoring because they are accessible by design.
Reprocessing follows the KRINKO/RKI recommendations. Ultrasound is described as an authorised procedure. There is no specific standard for robotic pre-cleaning, but TRISON can be validated because time, temperature and rinsing parameters are reproducibly recorded and documented.

Join us in

CONTACT

E-mail

info@bandelin.com

Give us a call!

+49 30 76880-0

Address

Heinrichstraße 3-4, 12207 Berlin

Bandelin Electronic

Quality since 1955

We - a Berlin-based family business in its third generation - specialise in the development, manufacture and distribution of ultrasonic devices, corresponding accessories and application-specific cleaning and disinfection preparations. The high vertical range of manufacture, a modern production facility and motivated employees distinguish us and are guarantors for constantly new quality products.

EN