SONOREX TECHNIK HA 40 planing head fixture

Properties

Safe handling of the planing heads
Targeted guidance through the intensive ultrasound field
Retrofittable

Out of stock

Description

The planing head holder enables quick and thorough cleaning in the SONOREX TECHNIK ultrasonic bath without subsequent cleaning.
With the help of the motorised axis drive, the entire cutting surface is guided through the intensive ultrasonic field. This facilitates the reprocessing of the planing heads and greatly reduces the risk of injury compared with
manual cleaning. A suitable planing head holder can easily be retrofitted to an existing SONOREX ultrasonic bath. This leads to significant time and cost savings compared to manual cleaning.
Recommended cleaning preparation: TICKOPUR TR 13 or for light soiling: TICKOPUR R 33

Frame and planing head mounting axle are made of stainless steel 1.4301. The diameter of the planing head mounting axle is 1 (tube: Ø 33.7 × 3.2 mm), other mounting axles with Ø 20 50 mm can be used if required but must be provided by the customer and are not included in the scope of delivery.
The maximum total load is 80 kg. The speed of the drive roller is approx. 1 rpm.

Additional information

Order number

Time setting [min]

Operating voltage [V]

Mains cable

Outer dimension length [mm]

Outer dimension width [mm]

Outer dimension height [mm]

Degree of protection housing

CE marking

Payload [kg]


Data sheet

Download current instructions for use

Flyer/Prospectus

Download current flyer/prospectus

similar

PRODUCTS

This will close in 0 seconds