SONOREX TECHNIK RM 40.2 U-ST Ultrasonic bath with overflow pocket and interface, 40 kHz

Description

Ultrasonic bath for industry, service and maintenance. The welded oscillating tank made of stainless steel 1.4404, 2 mm guarantees maximum durability even with intensive use. A modular design enables a wide range of configurations from individual cleaning tanks to complete cleaning lines. The integrated overflow pocket is used to connect an oil separator for separating cleaned oil films from the cleaning solution

The integrated overflow pocket is used to connect an oil separator to separate cleaned oil films from the cleaning solution.

The ultrasonic baths with the additional designation ...-ST are equipped with an interface (potential-free contacts) for control and monitoring by an external control unit.
Application examples:
- Activation via relay of a PLC or robot controller
- Activation by means of control voltage from a PLC or robot controller
- Activation via manual switch and indication via signal light

For optimally coordinated ultrasonic cleaning, matching baskets, lids and cleaning and disinfection concentrates are available as accessories.

Zusätzliche Informationen

Weight	29,0 kg
Order number	8684
Internal dimension L [mm]	475
Internal dimension B [mm]	300
Inner dimension T [mm]	300/315
Capacity [l]	46,0
Work content [l]	31,0
Vol. to overflow. [l]	36,0
Level indicator	200
Level sensor	Conductivity sensor (no demineralised water, conductivity of the liquid > 20 µS/cm)
Ultrasonic tank material	Stainless steel 1.4404
Ultrasonic tank thickness [mm]	2,0
Shape of the tub corners	right-angled
Procedure	3-way ball valve G ½ incl. hose and hose nozzles, brass - galvanised, on the left-hand side
Overflow	Firmly shrink-wrapped with sealing cap G 1, on the right side
Overflow bag	on the right side
Tub floor	inclined
Ultrasonic peak power [W]	2000
Nominal ultrasonic power [W]	500
Power setting	fixed
Ultrasonic frequency [kHz]	40
Operation	via interface
Operating voltage [V]	230 V~ (± 10 %), 50/60 Hz
Mains cable	2 m, fixed to the unit, with earthing contact plug CEE 7/7 (type E+F)
Outer dimension L [mm]	540
External dimension B [mm]	340
Outer dimension H [mm]	495
Housing material	Stainless steel 1.4301
Degree of protection housing	IP 32
Handles	on the sides
CE conformity	Low Voltage Directive 2014 / 35 / EU, EMC Directive 2014 / 30 / EU, RoHS Directive 2011 / 65 / EU
Packaging L [mm]	670
Packaging B [mm]	470
Packaging H [mm]	565

Instructions for use

Here you will find the current instructions for use for the current product. For old products, please use the instructions for use search under https://bandelin.com/manuals/