SONOREX TECHNIK RM 16.2 H-ST Spülbad mit Überlauftasche, Schnittstelle für SPS/Robotiksteuerung und Heizung

Description

Sink for industry, service and maintenance. The welded oscillating tank made of stainless steel 1.4404, 2 mm guarantees maximum durability even with intensive use. A modular design enables a wide range of configurations from a single cleaning tank to a complete cleaning line. The integrated overflow pocket is used to connect an oil separator for separating cleaned oil films from the cleaning solution

The integrated overflow pocket is used to connect an oil separator to separate cleaned oil films from the cleaning solution.

The ultrasonic/rinsing baths with the additional designation "...-ST" are equipped with an interface (potential-free contacts) for control and monitoring by an external control unit.
Application examples:
- Activation via relay of a PLC or robot controller
- Activation by means of control voltage from a PLC or robot controller
- Activation via manual switch and indication via signal light

For optimally coordinated ultrasonic cleaning, matching baskets, lids and cleaning and disinfection concentrates are available as accessories.

Zusätzliche Informationen

Weight	18,0 kg
Order number	8682
Internal dimension L [mm]	325
Internal dimension B [mm]	275
Inner dimension T [mm]	200/210
Capacity [l]	200
Work content [l]	13,0
Vol. to overflow. [l]	15
Level indicator	135
Level sensor	Conductance sensor
Tub material	Stainless steel 1.4404
Tub thickness [mm]	2,0
Shape of the tub corners	right-angled
Procedure	3-way ball valve G ½ incl. hose and hose nozzles, brass - galvanised, on the left-hand side
Overflow	Firmly shrink-wrapped with sealing cap G 1, on the rear side
Overflow bag	at the back
Tub floor	inclined
Operation	Rotary knob
Temp. set. (C)	30-80
Heat output [W]	800
Operating voltage [V]	230 V~ (± 10 %), 50/60 Hz
Mains cable	2 m, fixed to the unit, with earthing contact plug CEE 7/7 (type E+F)
Outer dimension L [mm]	365
External dimension B [mm]	340
Outer dimension H [mm]	390
Housing material	Stainless steel 1.4301
Degree of protection housing	IP 32
Handles	on the sides
CE conformity	Low Voltage Directive 2014 / 35 / EU, EMC Directive 2014 / 30 / EU, RoHS Directive 2011 / 65 / EU
Packaging L [mm]	475
Packaging B [mm]	445
Packaging H [mm]	465

Instructions for use

Here you will find the current instructions for use for the current product. For old products, please use the instructions for use search under https://bandelin.com/manuals/