SONOREX TECHNIK HA 112 Planing head fixture

The planing head holder enables quick and thorough cleaning in the SONOREX TECHNIK ultrasonic bath without subsequent cleaning.
With the help of the motorised axis drive, the entire cutting surface is guided through the intensive ultrasonic field. This facilitates the reprocessing of the planing heads and greatly reduces the risk of injury compared with
manual cleaning. A suitable planing head holder can easily be retrofitted to an existing SONOREX ultrasonic bath. This leads to significant time and cost savings compared to manual cleaning.
Recommended cleaning preparation: TICKOPUR TR 13 or for light soiling: TICKOPUR R 33

The frame and the planer head mounting shaft are made from 1.4301 stainless steel. The diameter of the planer head mounting shaft is 1“ (tube: Ø 33.7 × 3.2 mm); other mounting shafts with a diameter of 20–50 mm can be used if required, but must be supplied by the customer and are not included in the scope of delivery.
The maximum total load is 80 kg. The speed of the drive roller is approx. 1 rpm.